Go-Keto Glucose and Ketone Urinalysis Strips

Content: 100 strips per container

Directions for use:

Allow the strip, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing. The urine specimen must be collected in a clean and dry container and tested as soon as possible.

1. Remove the strip from the closed canister and use it as soon as possible. Immediately close the canister tightly after removing the required number of strip(s). Completely immerse the reagent areas of the strip in fresh, well-mixed urine and immediately remove the strip to avoid dissolving the reagents below.
2. While removing the strip from the urine, run the edge of the strip against the rim of the urine container to remove excess urine. Hold the strip in a horizontal position and bring the edge of the strip into contact with an absorbent material (e.g. a paper owel) to avoid mixing chemicals from adjacent reagent areas and/or soiling hands with urine.
3. Compare the reagent areas to the corresponding color blocks on the canister label at the specified times. Hold the strip close to the color blocks and match carefully.

Note: Results may be read up to 2 minutes after the specified times.

Refer to the instruction Manual (English) for details. 

Storage:

Store as packaged in the closed canister either at room temperature or refrigerated (2-30°C). Keep out of direct sunlight. The strip is stable through the expiration date printed on the canister label. Do not remove the desiccant. Remove only enough strips or immediate use. Replace cap immediately and tightly. DO NOT FREEZE. Do not use beyond the expiration date.

Note: Once the canister has been opened, the remaining strips are stable for up to 3 months. Stability may be reduced in high humidity conditions.